One button, at the end of a job. When a job is invoiced in Rental HQ, Push to accounting creates the matching invoice in Xero: the right contact, the lines of your invoice, and exactly the VAT your invoice shows. It goes one way, and it goes once. What reaches Xero is the same for all three packages, and is in the Accounting Overview.

What It Does, and What It Does Not

The integration exists to stop you typing an invoice twice. You build the job in Rental HQ, you mark it invoiced, and the invoice appears in Xero ready for you or your bookkeeper.

  • It writes invoices and the contacts on them. Nothing else is written to your Xero organisation
  • It never records payments, deletes or voids anything. Those stay in Xero, where your bank feed already is
  • It reads only what it needs: your sales accounts for the list you choose from, your tax rates, and whether an invoice it sent is still there
  • It is one way. Editing an invoice in Xero does not change the job in Rental HQ, and editing the job afterwards does not change the invoice

Connecting Xero

Go to Settings → Integrations and click Connect Xero. You sign in at Xero, not at Rental HQ, and allow the connection there. Rental HQ never sees your Xero password.

When you come back, the card shows Connected with your organisation’s name. Check it is the organisation you meant: that is the one that receives your invoices. A window then offers Choose the sales account, the one step left. Connecting an organisation you connected before brings its sales account back, so there is nothing left to choose.

Connect, Reconnect and Disconnect are shown to owners and administrators. If you use Rental HQ on the Mac, the same card is under Settings → Billing, in Accounting.

Choosing the Sales Account

Every line on the invoice posts to one sales account from your own chart of accounts. Under Post invoices to on the Xero card, choose it from the list of your active sales accounts, shown as code and name, such as 200 · Sales. If Rental HQ cannot read the list, which can happen on a connection made before 1 September 2026, type the account code instead.

Until an account is chosen, the card says Invoices cannot be pushed until this is set, and a push is refused rather than guessed. A wrong account posts real income to the wrong place, and that is found by an accountant months later.

Drafts or Approved

Under Push invoices as, choose how invoices arrive:

  • Draft, the default: invoices arrive in Xero as drafts for someone to check and approve
  • Approved: invoices are approved and posted to your ledger straight away. Undoing one means voiding it

Neither setting emails the invoice to your client.

What Lands in Xero

  • The contact: matched on the client’s company name, or the contact’s name if there is no company. If a Xero contact has exactly that name, it is used. If not, one is created with the email, phone and address from the contact record. An existing contact is never renamed, changed or merged
  • The lines of your Rental HQ invoice: the same lines in the same order, coming to the same total, with options not taken and kit parts left out, each service group as one line, and deals, discounts and any replacement charge for lost kit as lines of their own. The Accounting Overview has the detail
  • The sales account you chose, on every line
  • The invoice number: Xero’s own next number, which comes back in the confirmation. The job reference goes in the invoice’s Reference, so it can be traced back to the job
  • The client’s reference: when the job has one (their purchase order number or budget code), it goes first in the Reference, with the job reference after it, for example BR-DAV-AV-04 (RHQ-2026-0046), because Xero has one reference box and their finance team matches on theirs
  • The dates: dated the day you push, and due after the payment terms the invoice was sent with: yours from Settings → Tax and terms, thirty days unless you have changed them, or the client’s own when Invoices due by the client’s own terms is on

VAT and Tax Rates

Xero is told the VAT on each line, so its VAT is exactly your invoice’s, to the penny. The rate comes from Settings → Tax and terms.

  • At 20% in pounds, lines go at Xero’s standard 20% (VAT on Income)
  • At any other rate, such as 5%, or the sales tax of another country, lines go at the rate in your Xero organisation that matches yours. Reverse charge and other special schemes are never picked
  • Lines with no VAT on your invoice go as No VAT, and so does every line if your rate is 0. Xero never adds VAT your invoice does not have

If your organisation has no rate to match yours, the push is refused and says so, rather than posting the wrong VAT: add a rate for sales at your rate to your organisation’s tax rates in Xero, or correct your rate in Rental HQ under Settings → Tax and terms, then push again.

If you charge a rate other than 20%, or work in a currency other than pounds, and your Xero connection was made before 1 September 2026, the first push may ask you to reconnect, so that Rental HQ can read your organisation’s tax rates. Click Reconnect on the Xero card and allow the connection again at Xero. Your sales account and your other choices are kept, and nothing already in Xero is affected.

Currencies

Invoices go in your company’s currency. If it is your Xero organisation’s base currency, nothing changes. If it is another currency your organisation has added, Xero raises a foreign currency invoice at its own rate. If your organisation does not use it, nothing is sent and the message says so: add the currency to the currencies your Xero organisation uses, which needs a Xero plan with multi-currency. For a company in UAE dirhams, UAE VAT goes only to a Xero organisation in the UAE, on its own 5% sales rate; pushed to an organisation anywhere else, nothing is sent and the message says to connect the one for your UAE business. A new contact takes the country from the client’s address, or your company’s if the address has none. See USD and Other Currencies.

Pushing the Same Job Twice

Nothing happens twice. Rental HQ records the invoice it created, and a second push on the same job tells you the invoice is already in Xero, with its number, and sends nothing. If the invoice is still on its way, a second push says so. A push that failed is not counted as done, so once you have fixed whatever it complained about, you can push again.

Deleted or voided it in Xero? Push again and Rental HQ sends a fresh one. It asks Xero first, and only an invoice that is deleted or voided there counts as gone. If Xero cannot be asked, the push says so and sends nothing; try again in a moment.

If you send the client a new version of the invoice after pushing, the push does not send it on its own, because Xero would then hold two invoices for one job. Pushing tells you which version was sent: void or delete the first invoice in Xero, then push again.

When a Push Fails

Failures are explained in plain words with what to do about them: an archived sales account to choose again, a client with no name, a rate or a currency your organisation does not have. If Xero stops accepting the connection, because it was revoked in Xero or has lapsed, the message asks you to reconnect, and the Xero card says so too: click Reconnect on the card.

If you need us, tell us the job and the message, and we can find the exact request in our logs.

Disconnecting

Disconnect on the Xero card ends the connection and removes the stored authorisation. Invoices already in Xero stay exactly where they are, and Rental HQ keeps its record of which jobs it pushed and your choices on the card. Connect the same Xero organisation again and it carries on where it left off: a job you pushed before is still known to be in Xero, and your sales account is still chosen. Connect a different organisation and choose its sales account; jobs pushed to the old organisation are not counted as being in the new one. To sign in again without disconnecting, use Reconnect instead.

That holds unless a different organisation was connected in between. Rental HQ remembers one organisation for each job, so a job you pushed to the other organisation is remembered there, not in the first. After switching back, check Xero before pushing such a job again, as it would arrive a second time.

Connect one accounting package at a time. A push does not ask which set of books you meant, so with Xero, QuickBooks or FreeAgent connected together it is not predictable which one receives the invoice. If you are moving from one to another, disconnect the old one first.

What we hold. The authorisation from Xero is encrypted before it is stored. Your Xero password is never sent to Rental HQ, and no other company using Rental HQ can see anything about your connection or the invoices sent through it.

Was this helpful?
Up next
QuickBooks
Connecting QuickBooks Online instead, and how it differs.