How your warehouse scans
Every company scans with Smart Scan. An owner or admin can change that under Settings → Warehouse, How the warehouse scans, which offers two choices:
- Smart Scan (recommended): no modes at all. Scan a thing and Rental HQ works out what happens to it: ready, into the case, onto the van, or home again. Cases that remember their contents, van labels, quantities such as 12x, badges for a shared scanner and counting in hired kit all come with it. See Smart Scan
- One step at a time: a scan makes the thing ready, and that is all. Prep, Dispatch and Return are separate tabs, and you choose the step before you scan
The choice applies on the web, the Mac and the phones, with no app update. The rest of this article is about One step at a time, condition on return, and two things that belong to the iPhone’s One step at a time scanning, Scan to Prep and the pick list: offline scanning and the Lock Screen. Smart Scan needs a signal and does not show a Live Activity.
The four scan modes
Open the scanner from the accessory above the tab bar (or tap Scan inside a job) and pick a mode:
- Lookup, scan any barcode to see the asset: product, serial number, condition, current status, and which job it's on. No changes are made; it's a read-only "what is this?"
- Allocate, scan assets as you pick them for a job. Each scan marks the line prepped and sets the asset to In Prep. Nothing has left the building yet. In the web portal this same mode is labelled Prep.
- Dispatch, scan assets out against a job. Each scan marks the line dispatched and sets the asset to On Hire.
- Return, scan assets back in as they come off the truck, with optional condition logging per item.
Allocate and Dispatch need a job chosen first. Lookup does not, and Return works it out from the asset's active dispatch if you have not picked one.
Bulk stock scans one unit at a time. Cables, sandbags and tape have no per-unit barcode, so the product itself is scanned: by its own barcode (set it on the product's edit form) or by its SKU. Every scan moves exactly one unit through prep, dispatch or return, and the Mac and iPhone apps say how many are left to scan on the job. In these modes there is no quantity box: scan the label three times to move three units. With Smart Scan, type the quantity first; see Twelve at once.
Where you can scan
Scanning is not iOS only. The same endpoints back three places:
- iPhone: The full camera scanner, with all four modes, offline queueing and Live Activities
- The web portal: Scan on the job page opens the scan station, full screen, built for keyboard-wedge and wireless barcode scanners, which it hears anywhere on the screen. With Smart Scan there are no modes to choose; with One step at a time its modes are Prep, Dispatch and Return. A band across the top says what each scan did, in green, amber or red with a sound, and the job’s lines below count down as you go, grouped as the job groups them. A line’s product name opens that product in a new tab
- The Mac: the same station on a job, and a USB or Bluetooth scanner works anywhere in the app
If your warehouse already has wired or wireless scanners on a desktop, you do not need a phone to prep a job.
For a Zebra rugged handheld, or a Bluetooth scanner paired with a phone, see Handheld Scanners.
Continuous vs manual scanning
The camera scanner has two ways of reading barcodes, switched with the pill at the top of the screen. The pill tells you which one you are in:
- Continuous (default): the camera scans anything in view, back to back. Ideal for racking up a truck: point, beep, next case.
- Manual, tap the pill to switch. Frame the barcode, then tap the big CAPTURE button to scan a single frame. Use it for damaged labels, tiny barcodes, or harsh backlighting where continuous mode keeps grabbing the wrong code.
If a label will not read at all, there is also a manual entry sheet for typing a barcode by hand.
Whole-case dispatch
If your kit lives in flight cases and racks with their own barcodes, scan the case and Rental HQ moves everything packed inside it in one go. One scan instead of forty.
It works in all three directions. A prep scan preps the case and everything in it, a dispatch scan sends them all out, and a return scan brings them all back in. On dispatch you get the choice: scanning inside a job, a toggle switches between Whole case and Per item, so you can still read a case out item by item when you want to.
Tip: Keep case contents up to date. A case scan trusts the packed list, so if you swap a mic out of Case 12, update the case so the next scan is accurate. For a permanent rack, its contents are its default accessories: see Cases & Racks. With Smart Scan, each permanent case is built once and remembers what is in it; see Cases: Permanent, Temporary and Loose Kit.
A case scan never invents a condition for the contents. Nobody opened the case and inspected the eight dimmers inside it, so their condition is left exactly as it was. If the case itself comes back Poor, Damaged or Broken, its contents are held for checking in Maintenance rather than going quietly back on the shelf. Anything you actually inspected, scan on its own.
Returns, conditions, and quarantine
In Return mode, each scan marks the item back in stock. You can also log its condition as it comes off the truck. There are five options:
- Good or Fair, the asset goes straight back to Available
- Poor, the asset stays Available but is quarantined, so it is held out of stock and out of availability until somebody looks at it
- Damaged or Broken, the asset is set to Maintenance and quarantined
Choosing Poor, Damaged or Broken prompts for notes describing the fault (for example "cracked lens", or "no output on channel 2"). The quarantine reason is written for you as "Returned in x condition", with your notes appended, so whoever picks the unit up next knows what they are looking for.
Quarantined units carry a Quarantined pill on the Stock Levels page and an amber panel on the asset page with a Release button. Releasing clears the hold, and a unit on the shelf is Available again. Until then it will not be offered for another job. See Quarantine in Asset Tracking.
Offline scanning
Loading docks, basements, and field sites rarely have good signal, so the iPhone’s scan modes (Scan to Prep and the pick list) do not need one. Smart Scan needs a connection:
- When the app can't reach the server, scans are saved to an offline queue on the device
- A sync pill appears at the top of the screen showing how many scans are queued (e.g. "6 queued")
- As soon as connectivity returns, the queue syncs automatically in the background: the pill counts down and disappears when everything is up to date
- Queued scans survive closing the app; they'll sync next time you open it with signal
Heads up: While offline, the app can't check the live status of an asset on the server, so scan against the right job and mode, and let the sync sort the rest. If a queued scan conflicts (e.g. someone else already returned the item), you'll be told when it syncs.
Live Activity on the Lock Screen (iOS)
During a scanning session in the iPhone’s scan modes, Rental HQ shows a Live Activity on the iPhone Lock Screen and Dynamic Island: the job reference, a progress bar, the count dispatched against the total (for example 14/23), how many have come back in, and the phase it is in, from Loading to Ready to go to Returns to Complete. You can see load-out progress at a glance without unlocking the phone between cases.
Job auto-advance
Scanning drives the job pipeline for you, so nobody has to remember to update a status from the office. The rules are not symmetrical, and it is worth knowing which way round they go:
- The first scan starts prep. Scanning anything on a Confirmed job, in either Prep or Dispatch mode, moves it to In Prep. Work has begun
- The job reaches Dispatched only when everything has gone. It advances the moment the last outstanding line is scanned out, not the first. A part-loaded job stays In Prep, which is the honest answer
- The first return scan moves the job to Returned. There is no completeness check here: one item coming back is enough to flip a Dispatched job to Returned, because the truck is back on the yard even if the unload has only started
When every line has been scanned back, a note is added to the job timeline recording that it advanced automatically.
You cannot prep or send out kit against a job that is still an Enquiry, a Quote, or cancelled. Confirm it first. See Jobs & Workflow for the full pipeline.
The job’s Check In/Out tab can move the job the same way: switch on Check In/Out moves the job under Settings → Warehouse, At the bench. See At the Bench.
When the unload is over and some kit is still out, Finish check in on the job’s Check in/out tab says what became of each line, so the job can finish. See Overdue & Missing Kit.
Best practices
- Scan as you pack, one scan per item as it goes in the case beats a frantic bulk-scan at the end
- Log damage at the truck, condition notes written during unload are worth ten written the following week
- Watch the sync pill before you go home: make sure the queue is empty so the office sees tonight's returns tonight