What Is an Asset?
An asset is a single physical unit of equipment. While a product represents a type of equipment (e.g. "Shure SM58"), an asset is one specific SM58 with its own barcode, serial number, and history.
Assets are how Rental HQ answers the core question: "What is available between date X and date Y?"
Example: You own 8 Shure SM58 microphones. The product "Shure SM58" has 8 assets, each with a unique barcode (e.g. AV-0541 through AV-0548) and its own serial number, condition, and maintenance records.
The Stock Levels Page
The Stock Levels page (accessible from the sidebar) shows all your individual assets across every product. This is your master list of physical inventory.
View Modes
- Grid view: Cards showing the product image, barcode, serial number, and status badge
- List view: Compact table ideal for scanning through large inventories
Status Filter Pills
At the top of the page, coloured pills show a count for each status. Click a pill to filter the list, and click it again to clear the filter. There is an All pill, then one pill per status that actually occurs in your inventory: Available, On Hire, In Prep, In Transit, Maintenance, Written Off and Sold. A status you have never used gets no pill.
A separate Quarantined pill appears at the end whenever you have quarantined units. Quarantine is not a status: it is a flag that sits alongside one, so a quarantined asset also carries a status such as Maintenance. See Quarantine below.
Search
Search across barcodes, serial numbers, and product names. Search is server-side so it works instantly even with 16,000+ assets.
You can also find an item by its label from anywhere: type or scan its barcode into the command palette (Command-K, or Ctrl-K on Windows) and the item is at the top of the results. The search box on the Products page does the same, showing the item above the list.
Asset Details
Click on any asset to see its full detail page. The header shows:
- Barcode: The unique label identifier (e.g. AV-0542)
- Serial Number: The manufacturer's serial number
- Status and Condition: Shown as badges, with a Quarantined badge beside them when the unit is held
- The job: Beside the badges, the job the unit is out on (On) or being prepped for (Prepped for), by its reference and title. Click it to open the job
- Product: Which product type this asset belongs to. The name links through to the product
- Location: Where the unit lives, or "Unassigned" when nothing is set. While the unit is packed in a case, this card reads Packed in and names the case, because the unit is wherever the case is
- Purchased, Purchase Price and Replacement
Below the header are the tabs: Details (notes and the event timeline), Revenue, Inspections, Maintenance History and Repairs. Revenue shows for owner, admin and manager accounts, and Inspections comes with the H&S / Compliance module.
The Tags card pairs UHF and NFC tags with the unit, so a scan of the tag finds it, and says when each tag was last read and on which job. See RFID Tags and Readers.
Money is role-gated. An asset's purchase price, and the product's replacement cost and hire rates, are only sent to owner, admin and manager accounts. A warehouse or crew login sees the same asset page with those figures blank. That is deliberate, not a fault: what a thing cost is the business's position, not the loading dock's.
Cases
A case’s own page lists what is packed in it under In this case, and Empty this case takes everything out. A permanent case, such as a rack, is built there: scan or type what goes in it, by barcode or serial number, into the box under In this case, and take out anything that does not belong. See Cases: Permanent, Temporary and Loose Kit.
Location
Every asset can carry a location, drawn from your Venues list. It shows on the asset page as the Location card. Set it in Edit Asset, under Location, chosen from your warehouses. An asset that has never been given one reads "Unassigned".
Barcodes
Every asset has a unique barcode that serves as its primary identifier in the field. Barcodes are used for:
- Quickly identifying equipment during prep and load-in
- Checking items in and out of the warehouse
- Linking physical labels to digital records
- Searching for specific units on the Stock Levels page, or from the command palette
When you add an asset, Rental HQ offers the next barcode in your company’s own sequence: your company’s initials, in letters and numbers only, then a four-digit number. For a company called Event Plasma that is EP0001, then EP0002. Labels you have already printed keep their barcodes, and the numbering carries on from the highest number you have. An Assets import row with no barcode gets the next number from the same sequence.
Tip: If you're moving across from another system, your existing barcodes come with the import. No need to re-label your equipment.
Serial Numbers
Serial numbers are the manufacturer-assigned identifiers. They're useful for:
- Warranty claims and manufacturer support
- Insurance documentation
- Matching equipment to purchase invoices
- Identifying specific units during recalls
Serial numbers are searchable on the Stock Levels page alongside barcodes.
Asset Status
An asset is always in exactly one of seven statuses. Status is a record of where the unit physically is right now. It is not the same thing as whether the unit can be booked, which is covered in the next section.
Available
The unit is on the shelf and nothing is holding it.
On Hire
The unit has been dispatched on a job. A dispatch scan sets this. Once a unit is On Hire on a job, only a return scan brings it back.
In Prep
The unit has been picked for a job but has not gone out yet. A prep scan sets this. On the web scanner the same mode is called Prep; on mobile it is called Allocate.
In Transit
The unit is on the move, typically loaded on a vehicle.
Maintenance
The unit is out of circulation for testing, servicing or repair. A return scan of Damaged or Broken sets this, and so does quarantining an asset by hand or a failed inspection on a unit that is on the shelf.
Written Off
The unit is gone for good: scrapped, destroyed or lost. Written off assets are left out of your stock count and out of the per-asset availability list entirely, but the record stays for history.
Sold
The unit has been sold on. A dispatch scan refuses it.
Status Is Not Availability
This is the single most common misunderstanding, so it is worth being blunt about. The status pill does not decide what you can book. Availability is worked out for a date range from the bookings that overlap it.
For a serialised product, your stock for a date range is every asset that is not written off and not quarantined. From that stock, an individual unit is ruled out for those dates only if:
- its status is Maintenance or Written Off
- it is quarantined
- it is already allocated on a job that reserves stock, over dates that overlap yours
- a booked maintenance window overlaps your dates
- a partner has it committed over your dates
So an asset that is On Hire today is still bookable for next month. Being out on a job right now says nothing about a date range after it comes back. What blocks a date range is a booking that overlaps it, not the pill on the asset page.
Confirmed, in prep and dispatched jobs all reserve stock. Enquiries and quotes only reserve it if you have turned that on in your company settings. Setup and derig days widen the window a job holds, and an early return scan releases the unit from the day it came back. See Availability & Clashes for the full picture.
Getting Back to Available
Nothing in Rental HQ is on a timer. A unit does not go back to Available because a hire end date has passed. It goes back when something says it is back:
- A return scan: The normal route. Scanning an item in on Return sets it Available, unless the condition logged says otherwise
- Releasing it from quarantine: The Release button on the asset page clears the flag and sets a unit on the shelf Available
- Passing the test it failed: A pass of the same test lifts a quarantine that a failed inspection put on, and a unit in Maintenance goes back to Available
- Removing the line from the job: Deleting an allocation puts its units back on the shelf, but only if they were In Prep or In Transit and nothing else prepped or dispatched is holding them
- Put back in stock: For a unit marked In Prep, In Transit or On Hire that no job holds. See Put Back in Stock below
On hire is different. Removing a line from a job will not release a unit that is already On Hire. That kit is in a van or at a venue, and tidying up in the office does not bring it back: somebody has to scan it in.
Put Back in Stock
When a scan refuses a unit because another job has it, it names that job, by its reference and title: the unit is being prepped for it, or is out on it, so you know where to look.
A unit marked In Prep, In Transit or On Hire that no job holds says so on its page, such as Marked In Prep with no job. Scanning it onto a job puts it back in stock by itself, so the scan carries on. To put it back from the office, click Put back in stock on its page. Owner, admin, manager and warehouse accounts have the button, as they do Release. Either way the unit is Available again, and its history says Back in stock.
Condition Tracking
Alongside status, every asset carries a condition. There are four:
- New: Just purchased, unused
- Good: Normal wear, fully functional
- Fair: Some cosmetic wear but operationally sound
- Poor: Needs attention, may have functional issues
Condition is set when the asset is created, edited on the asset page, or written by a return scan. Condition on its own does not block a booking: what takes a unit out of circulation is its status or a quarantine flag.
Quarantine
Quarantine is a hold you put on one physical unit. It is separate from status, so a quarantined asset still has a status, and it is quarantine that keeps the unit out of both your stock count and the per-asset availability list.
How a unit gets quarantined
- A return scan logging Poor, Damaged or Broken. The reason is written automatically as "Returned in x condition", with the damage notes appended. Damaged and Broken also set the status to Maintenance; Poor leaves the status at Available, held by the quarantine flag alone
- By hand, with a reason of your own. Open the asset, choose Quarantine, say why under Reason: and click Quarantine. Quarantining by hand also sets the status to Maintenance. A unit that is out on a job, or picked or prepped for one, comes back first: scan it in, or take it off the job, then quarantine it
- A failed inspection. Recording a failed test holds the unit, and sets it to Maintenance if it is on the shelf. A unit held by hand stays held whatever a later test says
- A case coming back damaged. When a case is returned as Poor, Damaged or Broken, everything packed inside it goes to Maintenance too, because nobody has opened it to look
How to release it
Open the asset. A quarantined unit shows an amber panel with the reason and the date it was held, and a Release button. Releasing clears the flag, the reason and the date in one action. A unit on the shelf goes back to Available; a unit that is out on a job, or picked or prepped for one, stays with that job. Quarantining and releasing are both written to the asset's history.
Who can do what:
- Quarantine: owners, admins, managers, staff and the warehouse, on the web and the Mac. On the iPhone it is under Assets, for owners, admins, managers and the warehouse
- Release: owners, admins, managers and the warehouse, on the web, the Mac and the iPhone
Anyone else sees the hold, and the reason, but not the button.
Repairs
The Repairs tab on an asset records work done on that unit. A repair is either:
- Internal: Done in house, against a named technician
- External: Sent out, against a named vendor
Each repair carries a description, a cost, the date it was dispatched, an estimated return date, the date it actually came back, free-text notes, and a status: Pending, In Progress, Completed or Cancelled. The tab shows all of it in date order, newest first, so you can see at a glance what a troublesome unit has cost you and how long it spent away.
Inspections
The Inspections tab shows where the unit stands on every test it owes: In date, Due soon, Overdue, Failed or Never tested, with the date the next one is due. Below that is its history, newest first.
To record a test, click Record a test, choose the test, and fill in the date it was done, whether it passed, who tested it (you, unless you change it), any notes and, if you have one, the next due date. Leave the next date empty and the test’s interval works it out. Click Record it. The tests a unit owes come from its product’s Inspections tab. See Inspections & Testing for the whole register.
Maintenance History
The Maintenance History tab lists inspections and tests against the unit, each with its type, dates, a pass or fail result, a cost, the inspection it belongs to, and notes. There are four maintenance types: PAT test, service, repair and calibration.
To log a service, repair or calibration, go to Tools > Maintenance and click Log Maintenance. Find the item by its barcode or serial number, choose what was done, and choose Already done or Still to do. Work still to do has a due date and can be given to somebody: it appears on their My work under Kit to look at, and the item is not offered for hire on the day itself.
If this tab is always empty, check your modules. Maintenance records are part of the H&S / Compliance module. Without that module the maintenance endpoints are closed, so the tab has nothing to show no matter how much testing you do. Inspections are managed under Tools > Inspections in the sidebar, alongside H&S Documents and the PAT Tester, and all three appear only when the module is on. There is no Maintenance section in the sidebar.
The Revenue Tab
The Revenue tab answers the question every hire company eventually asks about a box: has this thing paid for itself?
It works from realised revenue. Rental HQ prices every job the unit has appeared on using the same engine that prices your quotes, and attributes each line's revenue to the specific asset that went out. The cost basis is the asset's purchase price. If no purchase price is recorded, the product's replacement cost stands in, and the page says so.
- ROI: Return on investment as a dial, with net profit beneath it
- Revenue to date: Total earned, plus what it has earned this quarter
- Net profit: Revenue after the cost of the unit
- Times hired: How many jobs it has been out on, and the average revenue per hire
- Utilisation: Days on hire, against days owned where a purchase date is recorded
- Cumulative revenue: A chart of earnings over time with a break-even line drawn at the cost of the unit, so you can see the month it crossed
- Payback date: When it broke even, and how many months that took
- Recent contributing jobs: The jobs behind the number, each linking to the job itself
There are further insights below the chart: best performing job, discount impact, last twelve months against the prior twelve, and where the unit ranks against the rest of your fleet.
Tip: Record a purchase price and purchase date on every asset. Without them there is no cost basis, so ROI, payback and utilisation cannot be worked out. You can add both from the Edit Asset form.
Asset History
The Details tab carries a timeline of everything that has happened to the unit: when it was created, when it was edited and what changed, when it was quarantined and why, and when it was released. Each entry shows the date and who did it. Until a unit has any events, the timeline falls back to showing when it was created and when it was purchased.
Bulk vs Serialised
Not all equipment needs individual tracking. Rental HQ supports two modes:
Serialised Products
Each unit is tracked as a separate asset with its own barcode, serial number, and history. Use this for high-value or unique equipment:
- Moving lights, speakers, amplifiers
- Cameras, projectors, switchers
- Mixing consoles, wireless microphone systems
- Rigging motors and truss sections
Bulk Products
Tracked as a quantity rather than individual units. Use this for consumables, low-value items, or items that are interchangeable:
- XLR cables, power cables, adaptors
- Gaffer tape, cable ties, velcro
- Safety bonds, shackles, R-clips
- Batteries, lamps, fuses
Bulk products still track total quantity and availability, but don't create individual asset records.