Barcodes work exactly as they always have. A scan station that has never read a tag looks and works as it did, and a barcode scanned beside a reader is still a barcode.

What You Need

A supported UHF reader set up in keyboard mode, so that it types each tag’s code and Enter into the box that has the cursor, as a barcode scanner does. Readers write the same code in different ways, with colons or spaces between the bytes or in lower case, and Rental HQ reads them all as one, so a tag paired with one reader is found by another.

An NFC tag is paired the same way, with a reader that types its code, or by typing the code yourself. Tags, Tag mode and the reader at the scan station are on the web.

Tags on a Unit

Each unit’s page has a Tags card. Each tag on it shows its kind, UHF or NFC, and its code, shortened when it is long. Hover over the code to see all of it, or click Copy. Under the code it says when a scan last read it and on which job, after Last read:, or Not read on a job yet.

  1. Open the unit’s page and, on the Tags card, click Pair a tag
  2. Under Kind:, choose UHF or NFC
  3. Hold the reader to the tag. Its code goes into Tag code: with Enter, and the tag is paired. Or type the code and press Enter

From then on, a scan of that tag finds the unit. Remove on a tag’s row takes it off, after asking: a scan of it then finds nothing until it is paired again.

Tag Mode: Tagging a Box of New Kit

Tag mode turns each new UHF tag the reader reads into a new unit of one product, with the next number, such as XLR-0412. It is how you tag a box of fifty new cables without typing anything.

  1. Open a serialised product and go to its Assets tab
  2. Click Tag mode
  3. If the product has no prefix for its units yet, Tag mode suggests one under Prefix for new units:. Change it if you like, such as XLR, and click Use this prefix. A prefix is one to six letters or digits, starting with a letter. Change prefix changes it later
  4. Pull the reader’s trigger over the box. Each new tag becomes the next unit, and the list shows it as it is made, with Next: and the number to come, and how many you have tagged this session. Click Done when the box is finished
  • A tag that is already on a unit is skipped and never moved, and the list says which unit has it
  • Holding the trigger reads the same tag many times. Each tag is made into a unit once
  • A barcode is refused: Tag mode only takes UHF tags
  • Not this one, on the newest unit in the list, takes it back
Screenshot needed Web: Tag mode on a cable product, with several new units tagged this session and the next number shown.

Replace Tag

When a unit’s tag is damaged or has stopped reading, click Replace on the tag’s row and read the new tag. The unit keeps its number and its history, and the old tag stops finding it.

The Reader at Smart Scan

A UHF reader works at the same Smart Scan station as a barcode gun. Sweep a trunk of tagged kit with the reader, then scan a case label or an untagged unit with the gun.

  • Once the station has read a tag, a line on the station says RFID reader: each tag counts once, labels scan as ever. It is there to tell you, and turns nothing off
  • Each tag counts once. Reading the same pile again while the same case or van is open does nothing more. Open a van and sweep the pile again, and it loads, once
  • Barcodes scan exactly as they always have: scan twice to put back, scan a case to shut it, and every pull on bulk kit counts
  • Tags that no unit has are not shown one red band at a time. They wait as a count you can open, Tags read that nothing has, with Add this code beside each one for whoever may add codes

Coming Back: All Here

Cables coiled in a steel-lined trunk shield each other, so a sweep may not read every tag. Coming back, each line with tagged kit says how many are back, such as 47 of 50 back. The station never pretends otherwise, and never holds you up for it:

  1. Count what the reader missed by eye
  2. Click All here (counted by eye) on the line
  3. The station asks first, such as “Book back the 3 XLR cables the reader did not find?”, and names the tagged units that will be recorded as not read

The rest are booked back as counted by eye. A unit that is out on another job is left for that job. If no tag was read on the job at all, nothing is recorded as not read, because a tag nobody tried to read says nothing about the tag.

A Tag That Has Stopped Reading

A unit whose tag goes unread on three jobs running is flagged, so you know to replace its tag. The station says so after All here, and the unit’s Tags card says “Not read on the last 3 jobs it came back from. Its tag may have died: Replace tag.” A flagged unit is never quarantined: it stays in use, and a person decides. Reading its tag again, or giving it a new one with Replace, clears the count.

Who Can Pair Tags

Owners, admins, managers, staff and warehouse pair, replace and remove tags, and use Tag mode. A read-only login sees a unit’s tags but changes nothing.

Was this helpful?
Up next
Smart Scan
A job from shelf to van and home again, one scan at a time, with no modes to choose.