Your invoice, in your books. When a job is invoiced, Push to accounting on the job sends its invoice to the accounting package you have connected: the same lines, in the same order, coming to the same total as the invoice your client has. It goes one way, and it goes once.

Connecting Xero, QuickBooks or FreeAgent

Go to Settings → Integrations. Under Accounting there is a card for each package.

  1. Click Connect Xero, Connect QuickBooks or Connect FreeAgent
  2. Sign in at Xero, Intuit or FreeAgent, not at Rental HQ, and approve the connection. Rental HQ never sees your password
  3. Back in Rental HQ, the card shows Connected and the name of your organisation
  4. For Xero or FreeAgent, choose where invoices post under Post invoices to: a sales account in Xero, an income category in FreeAgent. Until you do, invoices cannot be pushed. QuickBooks has nothing to choose
  5. For Xero or FreeAgent, choose how invoices arrive under Push invoices as: Draft unless you change it

Connect, Reconnect and Disconnect are shown to owners and administrators. Anybody else sees the cards with a note that an owner or administrator can connect them. On the Mac, the same cards are in Settings → Billing, under Accounting.

Each package has its own page: Xero, QuickBooks and FreeAgent.

Hiding a Partner You Won’t Use

If you will never connect one of them, an owner or administrator can click Hide in the corner of its card. It moves below the cards to Also available:, where clicking its name shows it again. Hiding is for the whole company and changes nothing else. A package that is connected always shows, so Hide is only offered on one that is not.

Pushing an Invoice

Push to accounting appears on a job once it is marked Invoiced. That is on purpose: it is the moment you have decided the numbers are final, and it keeps a half-built job out of your books.

  1. Open the job and mark it Invoiced
  2. Click Push to accounting
  3. A sheet lists each step as it happens, ending on Done, with the invoice number in your accounting package. Hide it and the push finishes on its own

A push that fails says why, in plain words, and is not counted as done: put right what it asks and push again. A push that worked is not repeated: pushing the same job again says it is already in your package, with its number, and a push started while another is still sending says so and sends nothing. If your package does not answer within thirty seconds the push stops and says so; if that happens while the invoice itself was being created, check the package for it before pushing again. Push to accounting is on the job in the Mac app too, once the job is invoiced.

What Reaches the Books

The invoice that reaches your books is the Rental HQ invoice, not a list of what went out on the job.

  • The invoice your client was sent. If you sent the invoice from Rental HQ, the latest version you sent is what goes across, even if the job has changed since. If you have not sent it from Rental HQ, perhaps because your accounting package sends your invoices, the invoice goes as it stands, exactly as it prints when you download it
  • Line for line. The same lines in the same order, coming to the same total. Each line’s name has the section it sits in after it and how the charge is made up, for example Yamaha DXR12 Active Loudspeaker (PA: compact), 3 days at £45.00/day. Identical lines that print as one go as one
  • Options not taken are left out. An optional extra the client did not take, and the alternatives they did not choose, do not reach your books
  • Kit parts are left out. A kit priced as a whole goes as one line, with what it includes written into its description, rather than as its parts. A kit whose items are priced one by one goes as those items
  • Groups as your invoice shows them. A group you quote as one line, or print at the Grouped or Summary level, goes as one line with its description
  • Services go across, such as transport and labour, with their type after the name, for example Van hire (Transport). A service group goes as one line, with its name and the sentence under it, at what its lines come to. A group with some lines charged VAT and some not goes as one line of each
  • The client’s reference, their purchase order number or budget code, when the job has one, as the job holds it when you push. Your invoice number is unchanged. Each package puts it where its invoice shows the customer’s reference: see How the Three Differ
  • Replacement charges for lost kit go at the end, each as a line of its own. They sit outside every deal and discount on the job, so an agreed price for the job does not include them. See Overdue & Missing Kit
  • Adjustment lines, the fixed amounts you add to a job in your own words, each go as a line of their own at what they came to on the invoice. They post with the rest of the invoice unless you choose otherwise: once your company has added one, Adjustment lines post to on the card lets an owner or administrator choose another account, so a commission taken off an invoice does not read as less hire. In QuickBooks they go on a Job Adjustments item posting to that income account

An invoice you sent before 1.6.0 goes as it stands today, because the copy kept when it was sent did not record its deals. If the job has changed since you sent it, send it again before you push.

Deals and Discounts

Discounts and agreed prices reach your books as your invoice’s totals show them, each as a line of its own, so the lines above them keep their full prices.

  • A group discount is a line after the group, such as Group discount (10%): Lighting. A markup reads Group markup
  • A discount on all the equipment is a line such as Equipment discount (10%)
  • An agreed price for a group makes the group one line at the agreed price, naming what it covers
  • An agreed price for the equipment is one line, Equipment, agreed price, naming what it covers
  • An agreed price for the services or the whole job is a line such as Deal adjustment: agreed price for the job, £2,000.00. Where the job has items with VAT and items without, the adjustment is split in two so the VAT stays where your invoice puts it
  • A discount on one line stays with that line. Xero takes it as a discount on the line. QuickBooks and FreeAgent have no discount on a line, so it goes at its price after the discount, or as its total with the quantity and discount in its description, whichever keeps the figure the same to the penny

If a deal leaves a fraction of a penny, it goes on the adjustment line, never on the price of a product your client might check against the quote. See Deals & Discounts for how the deals themselves work.

VAT

The rate comes from Settings → Tax and terms, and your invoice works the VAT out on its total. Lines your invoice charges no VAT on go across without it.

  • Xero is told the VAT on each line, so its VAT is your invoice’s to the penny
  • QuickBooks and FreeAgent work the VAT out themselves, from the rate Rental HQ sets on each line. They work it line by line, which can occasionally land a penny away from your invoice

Whichever package you use, if the total it has differs from your invoice’s, the confirmation says so: for example, QuickBooks has it at £1,440.01, and the Rental HQ invoice is £1,440.00. Check the VAT on it in QuickBooks before it goes to the client. The invoice has still been created, so correct it in the package rather than pushing again.

If your package has no tax rate to match yours, or FreeAgent does not have you as VAT registered, the push is refused and the message says what to put right, rather than posting the invoice with the wrong VAT or none.

No VAT at 0%

If you are not VAT registered, or charge no sales tax, set your tax rate to 0 in Settings → Tax and terms. Nothing then adds VAT to your invoices on the way: Xero’s lines go as No VAT, QuickBooks’s go with no tax code, and FreeAgent’s are zero rated, or carry no rate if FreeAgent does not have you as VAT registered.

Sending an Invoice Again

Pushing never makes two invoices for one job. If you send your client a new version of the invoice after pushing, the push says which version was sent and asks you to void or delete the first one in your accounting package. Deleted or voided it there (cancelled, in FreeAgent)? Push again and Rental HQ sends a fresh one, the version your client has.

USD and Other Currencies

Invoices are pushed in your company’s currency, set in Settings → Tax and terms, with your own tax rate, never the UK’s 20% unless it is yours. A client created in your package takes the country from their address, or your company’s if their address has none.

  • Xero takes the invoice in your currency. If that is not your organisation’s base currency, it becomes a foreign currency invoice, provided the currency has been added in Xero; if not, nothing is sent and the message says how to add it. UAE VAT on an invoice in dirhams goes only to a Xero organisation in the UAE
  • QuickBooks books every invoice in its company’s home currency. If that is not your Rental HQ currency, the push is refused rather than booking dollars as pounds. Connect the QuickBooks company that works in your currency
  • FreeAgent takes the invoice in your currency, except UAE dirhams: FreeAgent keeps UK books with UK VAT, so for a company in dirhams, connect Xero or QuickBooks

See Rate Engines & Currencies for choosing your currency.

One Package at a Time

A push does not ask which set of books you meant, so with more than one package connected it is not predictable which receives the invoice. Connect one at a time, and if you are moving from one to another, disconnect the old one first.

Disconnect on the card ends the connection. Invoices already in your books stay exactly where they are, and Rental HQ keeps its record of which jobs it pushed and your choices on the card. Connect the same organisation again and it carries on where it left off: a job you pushed before is still known to be there, and your sales account or income category is still chosen. Connect a different organisation and choose its sales account or income category; jobs pushed to the old organisation are not counted as being in the new one.

That holds unless a different organisation was connected in between. Rental HQ remembers one organisation for each job, so a job you pushed to the other organisation is remembered there, not in the first. After switching back, check your package before pushing such a job again, as it would arrive a second time.

If a message asks you to reconnect, or the card says Rental HQ needs you to reconnect, click Reconnect on the card. You sign in at your package again and come straight back, without disconnecting: your choices and the record of what was pushed are kept.

How the Three Differ

  • Xero: choose a sales account; invoices arrive as drafts or approved; Xero gives the invoice its own number, with the job reference as its reference; VAT to the penny. A client reference goes first in the reference, with the job reference after it in brackets
  • QuickBooks: nothing to choose, as every line posts against an item called Equipment Hire; the invoice number is the job reference; there is no draft setting. A client reference goes in the message on the invoice, as Your ref: BR-DAV-AV-04
  • FreeAgent: choose an income category; invoices arrive as drafts or marked as sent, and FreeAgent never emails them to your client; the invoice number is the job reference, as with QuickBooks, so your client’s payment reference matches. A client reference goes in FreeAgent’s own PO reference

Rental HQ writes invoices and the clients on them, and QuickBooks’s Equipment Hire item. It never records payments, and never deletes, voids or changes an invoice already in your books. What has been paid stays in your accounting package, where your bank feed is.

What we hold. The authorisation from your accounting package is encrypted before it is stored. Your password for it is never sent to Rental HQ, and no other company using Rental HQ can see anything about your connection or the invoices sent through it.

Was this helpful?
Up next
Xero
Connecting Xero, choosing the sales account, drafts or approved, and VAT to the penny.