Every job is a quote. When you add equipment to a job, you're building a quote. When the client confirms, the same data becomes the basis for an invoice. No duplication, no re-entry.

How Pricing Works

Each rental line on a job is priced like this:

Line total = rate x units x quantity, less the line's discount

  • Rate and units: Both come from the line's rate engine, described below. Auto-populated from the product, but the rate can be overridden per job.
  • Quantity: The number of units being hired.
  • Discount %: A per-line percentage discount, applied once the rate, units and quantity have been multiplied out.

A line’s spares go on top of its quantity at no charge: 8 + 2 spare is charged for 8, the Qty column shows 8, and the quote says “plus 2 spare at no charge” under it. See Spares on a Line.

A weekly line is not a daily line multiplied up: the engine changes both halves of the sum. See Rate Engines & Currencies for how to set them up.

  • Daily: Every chargeable day is billed, at the daily rate.
  • N-day week: At most N chargeable days are billed per seven-day week, at the daily rate. On a three-day week, a five-day or seven-day hire bills three days, an eight-day hire bills four, and a fourteen-day hire bills six.
  • Weekly: Whole weeks are billed at the weekly rate, and any part week counts as a full week, with a minimum of one. A line can carry its own weekly rate; where none is set, seven times the daily rate is used.

Every line is settled to the penny before anything is summed, and the total is the subtotal plus the VAT. That is what an invoice does. Summing unrounded lines and rounding once at the end put a penny or two of difference on job after job, for no reason a client could see. The subtotal and the VAT are each added as printed, so the figures on every quote and invoice add up on the page.

Chargeable Days

Three things can answer "how many days is this line billed for", in this order:

  1. The line's own chargeable days, if it has a value.
  2. The job's chargeable days, if the job carries one.
  3. The length of the hire, otherwise.

On a job with no override, chargeable days come from the hire period, and the hire period is counted inclusively: the 1st to the 5th is five days, not four. Use the chargeable phases on the Timeline section to bill for fewer days than the kit is out for. A five-day hire with one setup day and one de-rig day leaves three chargeable days: the equipment is unavailable for all five, and the client is billed for three.

Each row on the quote and invoice prints the days that line is billed for, so a line carrying its own chargeable days shows them on its row, and the row adds up to what the total counts.

The job-level and line-level values above are set by the import and are read-only in the portal. On a job that came across carrying one, the Timeline cannot change what is billed, because the imported value takes precedence over the phases.

Rental Items vs Sale Items

Rental HQ supports two pricing models for line items:

  • Rental items: Priced by duration, as described above. This is the default for equipment hire.
  • Sale items: A flat price per unit, not multiplied by the number of days. Use this for consumables, expendables, or items being sold outright (e.g. gaffer tape, haze fluid, cable ties).

For consumables, Rental HQ can work out how many a job needs from its kit list and add them as sale lines for you. See Consumables.

A kit can also be priced as a kit: tick Price as kit on the kit’s heading row and set its rate per day. The heading then carries one price for the whole bundle, multiplied by the kit quantity, and its included items are listed on the quote at zero so the client can still see exactly what they are getting. An optional item ticked when the kit was added is an extra, so it is still charged at its own rate. A kit with a Kit price set on its own page arrives priced this way. See Kits.

Discounts and Deal Prices

Discounts apply in a fixed order, from the narrowest to the widest:

  1. The line's own discount %, taken off that line.
  2. The group's discount or deal price. An equipment group can carry a percentage discount or an agreed figure for the whole group. Where both are set, the deal price wins and the percentage is ignored.
  3. The whole-job discount %, taken off all the equipment on the job.
  4. The job's deal prices. An agreed figure for the equipment, for the services, or for the whole job. The widest one set is the price. An equipment or whole-job deal turns the whole-job discount off: the agreed figure is the answer, not a starting point to discount from.

Both discount percentages accept a negative value. A negative global discount is a mark-up, and it is labelled that way: the quote shows an Equipment surcharge line with a plus sign rather than a discount with a minus.

The whole-job discount applies to equipment only. Services carry their own per-line discounts, and can have a deal price of their own.

Where each deal is set, what it amounts to, how VAT treats it and how the quote prints it are all in Deals & Discounts.

Services

Not everything you bill is equipment. The Services section on a job holds the rest, and each entry becomes its own row in a Services & additional costs table on the quote and the invoice, labelled with its type: Labour, Transport, Installation, Consumables, Accommodation, Travel or Other. Services can also be grouped, so the client reads one line for a group, such as Transport covering the van, parking and the congestion charge; see Service Groups. The totals box then carries one line per type. Each has a rate, a quantity, a unit, its own discount, and a taxable flag.

To change a service, click the pencil on its row. When you add a service with Pick from Catalogue, changing its Unit picks the matching rate from the catalogue: the day rate for days, the hourly rate for hours, the flat rate for a trip or each. A switch to miles or kilometres clears the rate instead, so a flat fee is never charged per mile by accident.

For transport, Miles from HQ under the quantity fills in the road miles from your company address to the job's venue, return unless you untick Return, and sets the unit to Mile. It fills in the distance, never the price. See Miles from HQ.

A labour line priced by the day or the hour takes People and Days (or Hours) where the quantity was, and its quantity is the two multiplied. Three people for three days is typed as 3 and 3, and the form shows Quantity: 9 days, the figure the quote and invoice charge; the Services list shows it as 3 people × 3 days. On a new day line, Days start at the job’s chargeable days and change with the job’s dates until you type a number. Clear it to follow the job’s dates again. Hours are always typed, and so are days on a hire booked until returned. Lines added before People and Days arrived keep the quantity they had.

Booked crew are billed from the Crew section rather than typed in by hand. For every crew booking marked billable, the quote picks up:

  • A labour line at the crew member's client day rate, for the days they are booked. Where no client rate has been set, the pay rate is used, so the job quotes at cost rather than at nothing.
  • A travel line, where a travel allowance is set.
  • An accommodation line, where an accommodation allowance is set.

A booking marked not billable still appears on job sheets and still costs the job. It just never reaches the quote.

On a quote, crew lines show the role rather than the person's name, so people can be substituted without reissuing the document. Invoices name the person.

VAT follows the taxable flag. Equipment is always taxed. Services are taxed only where the taxable flag is set, and crew travel and accommodation are not taxed by default. Where a document contains anything untaxed, the VAT line is marked with an asterisk and the note VAT applied to taxable items only is printed beneath the totals.

Warehouse Notes

Each line item can have warehouse notes: free-text notes intended for your warehouse team. These notes:

  • Appear on internal picking sheets and job preparation documents
  • Never appear on client-facing quotes or invoices
  • Are useful for instructions like "Use the newer batch", "Pack with flight case FC-12", or "Client requested black cables only"

Job Price

On the Equipment and Services sections, a price bar runs along the bottom of the job page. It reads the same figures the quote prints, penny for penny, so the number you are building towards is the number the client will see, services included: Equipment, Labour, Transport, Other, Subtotal (excl. VAT), VAT, the total and the Deposit. It re-reads itself whenever anything that changes the price is saved. On a phone it shows the total and the deposit.

While no line or group is selected, the pane beside the table is the Job price pane, where the price itself is set:

  • Discount whole job: The whole-job percentage
  • Deal prices: For the equipment, the services and the whole job, each with what it amounts to. Click Deal prices to open them; they stay open while one is set. See Deals & Discounts
  • Deposit: A percentage, with the resulting figure beside it
  • Options: Anything offered outside the total, with its price and whether the kit is there to be had. See Options & Choice Sets
  • Total weight, when your products carry weights

On a narrower screen there is no room for a column beside the table, so More detail on the price bar opens the quote’s own rows (Equipment, each type of service, any discount or agreed price, VAT and the total), the chargeable days and the hire period the figures were worked from, with the Job price pane beside them.

The price bar and the Job price pane are shown to roles that can see money. Each kind of reduction is listed separately on the quote, so you can see where it came from. VAT uses the tax rate configured in your Company Settings.

Quote and Invoice PDFs

Both documents are produced from the Documents menu in the job header, and both open in a preview with a Download button before anything is sent. They are offered only to roles that can see money, and the server refuses them for roles that cannot.

Quote PDF

A professional client-facing document containing:

  • Your company logo, name, and address
  • Client name and contact details
  • The client’s own reference, their purchase order number or budget code, as Your ref beside your reference, when the job has one (see Client reference)
  • Event and hire dates
  • Itemised equipment list with quantities, rates, and totals
  • Options and choice sets after the totals, where the job offers any
  • Quote footer text (configured in Settings)
  • Your terms and conditions at the end, once you have added them

A line is never split across two pages, and the closing block (validity, About and short terms) stays together. A kit component listed twice reads (additional) the second time.

A shorter quote from the same job. A group can print as one line with a sentence of your own, a document can fold every group or every category, and identical lines print once with their quantities added. The job keeps every line for the warehouse. See Clean Quotes.

Invoice PDF

The invoice only appears in the menu once the job has been marked invoiced. It contains everything on the quote, plus:

  • Your VAT/tax registration number
  • Bank details for payment (bank name, account name, sort code, account number)
  • Payment instructions
  • Invoice footer text (configured in Settings)
  • Your terms and conditions at the end, when Print terms on invoices is on under Settings → Footers and terms. A version of the invoice can hide them in Wording and inclusions

Your Own Versions

Make your own versions of the quote and the invoice under Settings → Documents → Wording and inclusions: a quote with no prices to go with the kit, say, or an invoice worded for a venue. Each one is offered wherever the document it is a version of is:

  • The Documents menu: Preview it beside the quote or the invoice, and send it from its preview with Send…
  • Send: Choose it under Document Type. The plain quote or invoice names the default it prints as, and a version that is no longer offered on the job is not sent in its place: Send says so, and you choose again
  • The Mac and the iPhone: Listed in the job’s Documents on the Mac, and under Document on the iPhone’s Quote screen

Each version can use its own words for Your ref, such as Your PO, or leave it off. A version without prices keeps it, so a delivery note carries the reference the client’s goods-in team matches on.

A version set to be Offered from a stage appears once the job reaches that stage. The one you mark as Default is what the plain quote or invoice prints as, in a preview and when it is sent. A sent document keeps the version it was sent as, so it prints again the same way from Sent Versions.

Configure your PDFs: All company details, bank details, and footer text shown on PDFs are pulled from your Company Settings. Make sure these are filled in before sending your first quote.

The Invoicing Lifecycle

In Rental HQ, the invoice flag is independent of the job status. This means:

  • You can invoice a job that is still in the "Confirmed" stage, for deposits or advance payment
  • You can invoice while the job is "Dispatched"
  • You can wait until the job is "Complete" before invoicing
  • The job continues along its pipeline regardless of whether it has been invoiced

This flexibility means invoicing never blocks your operational workflow. The warehouse team can keep working through prep, dispatch and returns while the office handles billing on its own schedule.

Once a job is invoiced, Push to accounting sends the invoice to Xero, QuickBooks or FreeAgent, line for line. See Accounting Overview.

An invoiced job is locked. Its equipment, dates and pricing become read-only, and re-pricing from the catalogue is refused, because the figures are now a record of what you charged. To change them, click the Invoiced button again to un-invoice the job, make the change, and invoice it once more.

Next Steps

Was this helpful?
Up next
Clean Quotes
Keep the detailed kit list for the warehouse and send the client a clean quote from the same job.