- Products vs Assets
- Adding a Product
- Viewing Products
- Editing a Product
- Changing the Photo
- Copy to Another Company
- Active & Inactive
- Deleting a Product
- Categories & Product Groups
- Product Detail Page
- Accessory Only, and Accessories That Bring Their Own
- Barcodes
- Suppliers
- Cases & Racks
- Kits
- Blueprints
- Custom Fields
Products vs Assets
In Rental HQ, a product represents a type of equipment you hire out, for example "Shure SM58 Microphone". Products hold the shared information: name, description, pricing, weight, image, and specs.
Each product can have multiple assets: the individual physical units you own. For example, you might have 12 SM58s, each with its own barcode and serial number. See Asset Tracking for more on assets.
Two tracking modes: Products can be serialised (each unit individually tracked as an asset) or bulk (tracked as a quantity, which suits cables, gaffer tape and consumables).
Adding a Product
- Navigate to Products from the sidebar
- Click Add Product in the top right. The modal is titled New product
- Type the product into the search bar at the top and click Find product to have the AI fill in description, image, specs and pricing (see AI-Assisted Entry). This step is optional
- Work through the four tabs: Basics, Inventory, Pricing and Details
- Click Add product
As you type the name, a line under it says You already have similar: and names any product you already have with a similar name, so the same product is not added twice. Each name opens that product in a new tab, or in its own window on the Mac, and your form stays as it is.
Required Fields
- Name: The product name as it will appear in your catalogue and on quotes. Be specific: "Martin MAC Aura XB" rather than "moving light"
- Product group: Used for filtering, organisation and SKU generation. You can create one inline without leaving the form
Optional Fields
- Description: A professional summary for quotes and customer-facing documents
- SKU: Your internal stock code. Leave it blank and Rental HQ generates one
- Weight: In kilograms, used for transport planning
- Replacement cost: What it would cost to replace the item, used for insurance
- Daily hire rate and Weekly hire rate: Your hire pricing
- Quantity in stock: For bulk products only
- Image URL: Found automatically by the AI, or paste your own
Manufacturer, model number and technical specs are not fields you fill in. The AI lookup identifies the manufacturer and model to find the right product and photo, and the specifications it finds are stored against the product and shown read only on the detail page. There is no manufacturer or model number box to type into.
Viewing Products
The Products page supports two view modes, toggled via the icons in the toolbar:
- Grid view (default): image-based cards showing the product photo, name, category, and daily rate. Ideal for visual browsing.
- List view: Compact rows. Better for large catalogues with thousands of items.
Both views are ordered by product name. There is no column sorting. The page remembers grid or list in that browser, and going back to it returns you to the search and filters you left.
Inactive products appear in both views, dimmed and marked with an Inactive label.
Search
The search bar at the top searches across product names and SKUs. Search is server-side and fast even with thousands of products, and results update as you type.
Type or scan an item’s barcode into the same box and that item is shown above the list, with its product, its status and the job it is on. Click it to open the item. See Asset Tracking.
Category Filter
Use the category dropdown to filter products by equipment type. The product count updates to show how many items match your current filter.
Pagination
Products load in batches as you scroll down (infinite scroll). The counter at the top shows "Showing X of Y products" so you always know how much of your catalogue you're viewing.
Editing a Product
- Click on any product to open its detail page
- Click the Edit button (pencil icon)
- Modify any fields you need to change
- Click Save Changes
You can also use AI Enrich on the detail page to fill in any missing fields without affecting existing data. To change the photo, use Find image to search for a new one, or Upload to supply your own. Upload cuts the product out of its background, as a found image is; for a photo taken on purpose against a set or a backdrop, choose Keep my photo as it is from the arrow beside Upload. They sit in the corner of the product image, with Put back previous image beside them once the photo has changed.
Changing the Photo
Find image shows you what it found before anything changes. Your current photo and the one it found sit side by side on the same background, with the site the found one came from underneath it.
- Use this image puts it on the product
- Try another looks again, and never shows you the same photo twice
- Keep current closes it, and nothing has changed
If it finds nothing, Upload your own takes the place of Use this image.
Above the buttons, Searching for: shows the words it searched with. Change the words to search for lets you search with others, such as the maker and model, until you close the sheet; the product keeps its name.
An Image from a Link, or Pasted
If you have found the right picture yourself, bring it into the same sheet:
- Use a link: paste a link to an image, or to a page that shows it, and click Get image
- Or paste an image into the sheet, or drop one in, for a site that will not hand its pictures over
Choose the Background: for it. Remove the background cuts the product out, like a found image; Keep my photo as it is leaves it untouched, for a photo taken on purpose. A link starts with Remove the background and a pasted image with Keep my photo as it is. Then click Use this image. A picture your company adds is only ever used on your own products: it is never offered to another company.
Every change of photo keeps the one it replaced, whether you found it, uploaded it or pasted an address on the edit form. After a found or uploaded photo, Undo on the message that follows puts the old one straight back. Put back previous image in the corner of the product image does the same at any time, however the photo changed. Press it again to swap back. Each change is listed in the product's history.
Changing a photo is for owners, administrators, managers and staff.
Copy to Another Company
If you work in two or more companies on Rental HQ, add a product once and copy it to the other. On a product’s page the button is beside Duplicate, and in Inventory it is in the bar that appears when you select products, so you can copy up to 200 at a time. It reads Copy to: and the other company’s name, or Copy to another company when you are in several, where you choose which under Copy to.
Before anything is copied, the window says what will come and what stays behind. Each product arrives as the other company’s own: its name, description, group, its own copy of the picture, its rates and whether it is active. Nothing that belongs to the company it came from goes with it: no stock, units, serial numbers, barcodes or jobs. If the other company already has a product with the same name, you choose whether to skip it or copy it anyway. Copying is for owners, admins, managers and staff, in both companies; the button only appears for somebody in more than one.
Active & Inactive
Beside the product group on the detail page is a pill reading Active or Inactive. Click it to switch.
Deactivating is how you retire a product you no longer hire out. An inactive product is dropped from availability entirely: it is not counted as stock and it never shows as available for a date range, however many assets sit behind it. It stays in your catalogue, dimmed and labelled Inactive, and every job it has ever been on keeps its history intact.
This is the right tool for a discontinued line, a product you have sold off, or an entry you created in error and cannot delete.
Deleting a Product
Owners, admins and managers can delete products, one at a time or many at once. Both ways follow the same rules, and both tell you what will happen before anything is deleted.
- Open the product's detail page
- Click the red Delete button
- Read what will happen, then click Delete to confirm, or Cancel
Deleting many products at once
To clear out a batch, such as a catalogue of test data you imported, delete from the Products list instead of one product at a time.
- On the Products page, search or filter until the list shows the products you want to delete
- Click Select in the toolbar, then click each product to pick it. To pick everything your search and filters show, not only the products loaded so far, click Select all matching in the bar along the bottom
- Click Delete
- Read what will happen, then click Delete again to confirm, or Cancel
One delete takes up to 5,000 products. If more match, Select all matching picks the first 5,000: delete those, then select again.
What a delete does
- Its assets go with it. A deleted product's assets leave Stock Levels too, with their history kept
- It comes out of kits. Any kit that includes it loses that line, and you are told if a kit is left with nothing in it. Any product that lists it as an accessory or consumable stops doing so
- A product on a job stays. A product on any job is left alone, so every quote and invoice keeps its lines. That includes past jobs and jobs in Recently deleted, because a deleted job can be restored with its lines. Make the product inactive instead
- A product on a purchase order stays while the order is still to be received, so goods in has somewhere to put it
- A product with assets out stays. If any of its assets is out on hire, in prep or in transit, the product is left alone until they are back
- A product a partner has asked for stays, while the request is open
A deleted product is taken out of your catalogue and out of availability, but the record is kept, so support can restore it if you delete the wrong thing. If you run the import again, a product you deleted stays deleted: the import skips it and says so in its report.
On the Mac, choose Delete Product from the product window's menu. To delete several, select rows in the Inventory table (hold Command or Shift to pick several, or use Select All Matching), then press Command and Delete, or right-click and choose Delete.
Categories & Product Groups
Rental HQ uses product groups (categories) to organise your equipment. The standard categories are:
- Audio: Microphones, speakers, mixers, DI boxes, wireless systems
- Lighting: Moving lights, LED fixtures, dimmers, control desks
- Video: Cameras, projectors, screens, switchers, monitors
- Rigging: Truss, clamps, motors, slings, hoists
- Power: Distribution boards, cables, generators, UPS
- Staging: Decks, legs, stairs, railings, drapes
- Comms: Intercoms, radios, belt packs
- Effects: Haze machines, smoke machines, confetti cannons
You can also create new categories inline: when adding or editing a product, simply type a new category name and it will be created on the fly. No need to go to a separate settings page first.
When you use AI-assisted entry, the AI automatically suggests the most appropriate category based on the product. See Product Groups for more on managing categories.
Auto-Generated SKUs
Leave the SKU blank and Rental HQ generates one from your company name and the product group: your company initials, then the first letter of the group, then a three-digit number. So the first Audio product for a company called Event Plasma gets EPA-001, the next gets EPA-002, and the first Lighting product gets EPL-001. You can always override this with your own SKU. See Product Groups for more.
Product Detail Page
Clicking on a product opens its full detail page. The header carries the image, the name and SKU, the description, the daily and weekly rates, and four stat cards: In Stock, Replacement, Weight and Sale Price. Below that are the specifications and any custom fields with values. Beside the product group sit the Active or Inactive pill and a Showroom or Hidden pill.
If your company has the Showroom, owners, admins, managers and staff see a switch, In the Showroom, in place of that pill. It puts the product in your showroom, or takes it out, straight away. The Visible in public Showroom tick in the product’s edit form does the same.
Tabs
- Overview: The default tab
- Assets (serialised products) or Stock (bulk products): for serialised products this lists every tracked unit with a count on the tab itself, and gives you Add Asset to create units with barcodes and serial numbers without leaving the page. In the Add Asset window, Create & Add Another saves the unit and readies the form for the next: the condition, purchase price and date stay, and the barcode moves on to the next in sequence. To bring in many units at once, use the Assets import. For bulk products it is where you adjust the quantity in stock
- Timeline: Each unit of the product across the days, weeks or months: the jobs holding it, the days kept after a return, maintenance and quarantine, with what is free each day along the top, counted the same way as Availability. Kit booked with no unit chosen yet has a row of its own, and a bulk product shows what is booked. Every job’s bar opens its job. Choose Week, Month or Quarter, and drag, or use Earlier, Today and Later, to move through the dates. On the web
- Accessories: Kit that goes out with this product, and how many with each one. Each accessory’s Inclusion says whether adding the product to a job brings it. Always goes on with the product every time. Included goes on unless somebody unticks it in Add equipment. Optional is offered in Add equipment and goes on only if somebody ticks it. Each accessory’s Charge says what it costs when it goes on, whatever its inclusion: Charged at the accessory’s own rate, or No charge. A new Always or Included accessory starts at No charge and a new Optional one at Charged, and either can be changed. A ticked optional one shows as Optional extra on the job. Changing an accessory changes what is added from then on, never a line already on a job. An imported accessory arrives with the inclusion and the charge it had in your old system. For a permanent case, its Included accessories are what it should hold
- Consumes: What one of this product uses up on a job, such as batteries. See Consumables
- Inspections: The tests every item of this product needs, such as PAT or LOLER. Choose a test under Requires, and fill in Sooner, if needed when this product is tested more often than the test’s usual interval. Every item of the product owes these tests, including items you add later. Setting them needs the H&S / Compliance module. See Inspections & Testing
- Suppliers: Who you hire or buy this product from, with their part number, what it costs from them, how long they take and a link to it on their website. See Suppliers
- Revenue: What this product has earned across your jobs
From the detail page you can also Edit, run AI Enrich, change the photo with Find image or Upload (see Changing the Photo), and Delete.
Similar products
The Overview tab lists what else you have that could do the same job, and why each is there: Pinned alternative when somebody pinned it, Swapped before when you have swapped the two on a job, Same product group for the products in its product group closest on rate, or a short reason from Rental HQ’s AI, marked with a sparkle. Pinned products come first. Click a name to open that product. Owners, admins and managers also see each one’s daily rate.
Pin a product to mark it as a like-for-like alternative, or use Pin another product as an alternative (Pin a Product… on the Mac) for one in a different product group. A pin works both ways, so each product lists the other. When you swap either one on a job, Swap offers the pinned product first, marked Pinned, as long as it is free for that line’s dates. Pinning and unpinning is for owners, admins, managers and staff.
Accessory Only, and Accessories That Bring Their Own
Accessory Only
Some products are kept only to go with others, such as a lens cap. Open the product, click Edit and tick Accessory only. It is then left out of the search when you add kit to a job, so it no longer crowds the products people do hire. It still comes along as an accessory and inside kits, and shows everywhere else: Inventory, its own page, reports and availability. Typed whole as its SKU or one of its barcodes, it is found as any product is, and a scan always finds it.
Products brought across from CurrentRMS keep CurrentRMS’s own Accessory only ticks for you to use or not: see Importing Data.
Accessories That Bring Their Own
Adding a product brings its own accessories, one level, as it always has. An owner or admin can switch on Accessories bring their own accessories in Settings → Jobs, under Accessories, and click Save changes. Adding a product then brings its accessories and what comes with each of those, three levels deep, each indented under the line it came with. A chain that goes round in a circle adds each product once.
It is off until you choose it. Before you switch it on, the setting shows what would change: how many products would bring more with them, what the last 90 days of jobs would have had added, and See the products lists them. Jobs already on the books stay as they are; Refresh accessories on a job fills in every level.
To add accessories to a line already on a job, see The Equipment Table.
Barcodes
A product can be known by more codes than its own barcode and SKU. The Barcodes card on its page lists them, and Add a code adds one: the maker’s EAN, a supplier’s own barcode, a box code with how many are in the box, or any other code printed on it. Each code belongs to one thing only, so a code already in use elsewhere is refused, naming what has it.
- Scanning. Smart Scan and stock checks find the product by any of its codes and by its SKU. A box code counts the quantity in the box
- A code nothing knows. Scan something Rental HQ does not recognise and you can add the code to the right product there and then, so it scans next time
- Labels. A product label prints the product’s barcode, or else its SKU, or else its EAN. Choose another under Code when you print, and a box code prints a box label. See Printing Labels
- Spreadsheets. Codes come and go in the spreadsheet round trip and the products import. See Importing
Suppliers
The Suppliers tab on a product lists everybody you hire or buy it from. Purchase orders offer them when the product is short on a job, so it pays to fill it in for the kit you sub-hire most.
- Open the product and choose the Suppliers tab, then Add a supplier (or Add the first supplier on a product with none)
- Search your contacts for the supplier. Contacts already marked as suppliers are listed first; choose anybody else and they are marked as a supplier too, so every purchase order offers them from then on
- Fill in what you know: Part number (their code for it), Cost, Lead time in days and Product link, the page for it on their website. None of them is required
- Tick Preferred for the supplier you would rather use, and click Add supplier
Each supplier shows as a row. Click the star to make one Preferred: a product has one preferred supplier, so starring another moves the star. The pencil edits a row where it is, the bin removes it after asking, and Product page opens the link in a new tab. The preferred supplier is listed first. Owners, admins and managers then see the rest from the cheapest; everybody else sees them by name.
The list keeps itself up to date as you order. Raising a purchase order adds its supplier to each product on it with the cost you ordered at, and booking the delivery in sets the cost to what you were charged. Imported suppliers are on the tab already, with their sub-hire price as the cost; a supplier with only a sale price is listed without one. A supplier you remove, or a cost you clear, stays that way when you import again.
Who sees the costs. Everybody can see who supplies a product and their part number. Costs are shown only to owners, admins and managers, and only they can change them. Owners, admins, managers and staff can add, edit and remove suppliers.
Choosing a supplier when you order
- Sub-hiring short kit. When a short line’s product has more than one supplier, its line in the purchase order offers each of them under Supplies this item, with what it costs from each and how long each takes, preferred first. Choosing one sets the line’s supplier and unit cost, and one order is raised per supplier you chose. See Sub-hire All
- Adding a product to an order. When you edit a purchase order and add a product the order’s supplier is listed for, its part number and cost fill in. If others supply it too, the line says so underneath, for example Also from: TCP at £40.00. The order’s supplier stays as it is
On the Mac, the product window’s Suppliers tab and the purchase order windows work the same way.
Cases & Racks
A product can be marked as a case or rack, meaning things get packed inside it. Tick Case or rack in the edit form and then choose what kind:
- Permanent. A rack: The contents are fixed and live in it. Adding the rack to a job brings its contents with it, already packed, and a single scan preps, dispatches and returns everything inside
- Temporary. A trunk or case: Filled by hand for each job during prep. Pack it, and scanning it then moves whatever is in it
For a permanent case, what it should hold is whatever you list under the Accessories tab. What each case actually holds is built on that case’s own page, under In this case: see Asset Tracking. See Cases: Permanent, Temporary and Loose Kit for how cases are packed, scanned and brought home, and Scanning & the Warehouse for the dock.
Barcodes on bulk products
Bulk products have no per-unit assets to carry a barcode, so a bulk product can carry one of its own: print a label for the product and each scan checks a single unit in or out. It can also be scanned by its SKU. Serialised gear uses per-asset barcodes instead.
Customs & carnet
For kit that goes abroad on an ATA carnet, the Customs & carnet section of the edit form has three fields, shown on the product page too:
- Country of origin: where it was made, as a two-letter code such as DE. Use GB for the United Kingdom. Left blank, the carnet uses your company’s default origin and asks you to check it
- Customs value: the value of one, in pounds. Blank or 0 uses the replacement cost. Only owners, admins and managers see it
- Commodity code: optional, the HS or tariff code, such as 85184080, if customs ask
The Mac’s product sheet has the same fields, in a section called Carnet.
Kits
A kit is a saved bundle of products that goes on a job in one go, such as a PA system or a lighting package. Kits live under Inventory → Kits.
- Click New Kit, give it a Kit Name and, if you like, a description, and click Create Kit
- The new kit opens straight away. Click Add Product and choose what goes in it, and how many of each
- Set each item’s Inclusion. Included goes on the job whenever the kit does. Optional is offered when the kit is added, and goes on only if somebody ticks it
Leave Kit price blank and the kit is charged as the sum of its parts. Enter a price per day and the kit lands on a job priced as a whole at that figure. Edit on the kit’s page changes its name and description. On the Mac, right-click a kit for Edit Kit… and Contents….
Adding a Kit to a Job
In Add Equipment, kits are listed first, in purple. Click the arrow beside a kit to see what is in it and how many of each are free for the job’s dates, with anything short in red. Optional items are listed underneath, each with a tick box. Tick the extras this job needs and click Add kit + 2 (the number is how many you ticked). Add kit on its own adds just the included items, and a kit with no optional items says Add all.
A chosen extra shows as Optional extra on the job and is charged at its own rate, even when the kit is priced as a whole: the kit’s price covers its included items, not the extras. See Rental Items vs Sale Items for kits priced as a kit.
Blueprints
A Blueprint is a saved list of kit you put on jobs again and again, such as a stage or a small PA. Blueprints live under Inventory → Blueprints, next to Kits. Give one a name, then add the products it puts on a job and how many of each. Changing a Blueprint never changes a job it is already on.
To use one, open Add equipment on a job and choose it from Blueprints. You see what is free for every line over the job’s dates first. It then goes on as lines, or as a group named after it; choose Quote as one line and the client sees one price while the warehouse sees every part.
Making a kit or a Blueprint from a product
A product that has accessories, such as one brought across from OnRent (formerly Current RMS), can become a kit or a Blueprint in one step. Open the product, go to its Accessories tab and click Make a kit from this or Make a Blueprint from this. You see the name, what goes in and how many of each, and the price before anything is made. The product and its accessories stay exactly as they were.
A kit is named after the product with “with accessories” on the end, which you can change. It holds the product and its accessories: Always and Included ones as Included items, and charged Optional ones as Optional items. Sold items, such as tape, are left out because a kit goes on a job as a hire, so add them separately. Free Optional extras are left out too, because on a kit they would be charged. The kit is priced to match the product added by hand: as the sum of its parts where it can be, or at one price where a free accessory has a rate of its own, so that accessory stays free. If the kit cannot match exactly, for example an accessory that comes one per four products, the sheet says so before you save. On a quote, a kit lists every part under its name, including accessories your documents hide when the product is added by hand.
A Blueprint holds the product, which brings its Always and Included accessories with it as it always does, and any charged Optional accessories you tick. On the web.
Custom Fields
Custom fields are defined once for your whole company under Settings > Custom Fields. Any you define for products then appear in the Details tab when you add a product, and in the edit form afterwards, under a Custom fields heading. The ones with values show on the product detail page under Custom Fields.
Use them for the things every hire company tracks differently: an asset register reference, a lamp type, an insurance category, a PAT interval.