Dates decide the booking. Where the kit is decides what is free. Kit that has been scanned out and not scanned back is still out, whatever the job’s status says, and Rental HQ holds it until it comes home or somebody decides what happened to it.
Out, Overdue and Missing
A line that has been scanned out and not scanned back is out. What that means for availability depends on how long it has been out:
- Out, and not yet due back: it holds the kit until its planned return, the hire end plus the job’s de-rig days
- Overdue: past its planned return, with nobody having decided anything. It is expected back, so it still counts as free for the jobs after it, and Rental HQ tells you, in amber, which of those jobs depend on it coming back
- Missing, or still with the client: somebody has said so at Finish check in. It holds with no end date until it is scanned back, and shows red if that leaves another job short
Overdue Kit, in Amber
Wherever a free figure is shown, overdue kit is named beside it. Short stays red; amber means “free, if it comes back”.
- The equipment table: a line that is only covered because of overdue kit has an amber Avail figure. Hover it, or choose the line, for “Covered by 2 overdue from MPS-2026-0006”, with a link to that job
- The availability grid: a day that counts on overdue kit has an amber dot and the count under the figure
- The availability peek, the checker and the product page: an Overdue count beside the free figure, and the jobs it is overdue from, labelled Overdue. A serialised unit that is free by the dates but still out says which job it is overdue from
- The equipment picker: the overdue count beside free, as you add
When you confirm a job or start its prep, Rental HQ warns you if any line depends on overdue kit: “2 of the Shure SM58 are only free because 2 are overdue from MPS-2026-0006”. It is a warning, never a refusal: the job still moves. The Mac and the iPhone show the same figures and the same warnings in the same words.
Finish Check In
The van is unloaded, everything that came back has been scanned in, and some kit is still out. Finish check in gives every line still out an answer, so the job can finish and the kit is held where it really is.
- Web: open the job’s Check in/out tab and go to Return. Mac: Check In/Out. iPhone: the card under the job’s scan progress. Then choose Finish check in. It shows on a dispatched or returned job with kit still out, for anybody who can check kit in
- Every line still out is listed in the job’s order: a kit as a heading with its items under it, an accessory under its line. Choose Missing, Lost or Still with the client for each, or Mark all missing. A choice on a kit or a line with accessories sets everything under it, and each can then be changed on its own
- The footer counts what is left to decide. Finish check in waits until every line has an answer
Afterwards the job reloads and says what happened: “Outstanding kit moved to MPS-2026-0006-1”, with a link to open it, or “Check in finished”. When nothing is left out, a dispatched job moves to Returned.
Consumables sold on the job, and text lines, are never “out”, so they are never asked about.
Outstanding Kit Jobs
Missing moves those lines to a job of their own, so the original can finish while the kit is chased and the client carries on paying for what they still have.
- It takes the original’s reference with -1 on the end (-2 for a second batch), the title “Outstanding from” the original’s, and the same client, venue and job type
- It is out, and its hire runs until everything on it is back, so it reads Ongoing in place of an end date. It holds the kit with no end, so nobody books it for next month by mistake
- Chips link the two: Outstanding from MPS-2026-0006 on the new job, Outstanding kit on MPS-2026-0006-1 on the original
What the outstanding job charges
The kit may simply be staying out on hire for longer, so the outstanding job goes on charging for it, as a job that stands on its own:
- The original job keeps the hire it agreed. Its dates and its figures do not change
- Each line keeps its own rate and line discount from the original job. The original job’s whole-job deal or discount does not carry over
- The hire runs from the day after its hire on the original job ended until the item is scanned back or marked lost. It is priced as a fresh hire from day 1, so a weekly rate or a multiplier table starts again at its beginning
- It keeps charging until it is invoiced. Marking it complete does not stop it. Once it is invoiced, its figures never change
When a missing item turns up, scan it back as usual, on the outstanding job or with Bring home, which finds the job itself. When the last line is home, the outstanding job is Returned. If it is never coming back, choose Mark lost… on the line: the hire stops that day and the replacement is added.
Lost Kit and Replacement Charges
Lost writes the item off and charges the client for it, so it is for owners, admins and managers. Choose it at Finish check in, or with Mark lost… on a line still out on an outstanding kit job, from the line’s menu or its pane.
- A serialised item is written off. Bulk stock goes down by the units that were yours; kit you hired in is the supplier’s, so it takes nothing off your stock
- A replacement charge goes on the same job, at the end of the ungrouped lines, reading “Replacement:” with the product and its barcode or serial. It is priced at the product’s replacement cost, or the price you type in the Replacement field. It is an ordinary line: change or remove it like any other. Owners, admins and managers can price a replacement below its replacement cost, for older kit for example
- Choosing Lost at Finish check in charges the replacement only, not the days since the original job ended. Marking a line lost on an outstanding kit job charges its hire up to that day, then the replacement
- A product with no replacement cost, and no price typed, is charged at nothing and flagged: “Price the replacement for 1 lost item” takes you to the line
- The lost line wears a red Lost pill and holds no stock
A replacement charge sits outside every deal. A job agreed at a round figure that loses an item costs that figure plus the replacement: group deals, the equipment and whole-job deals and the job’s discount never touch it. It prints last, under its own heading, Replacement charges, and reaches your accounting package as a line of its own. Change the heading’s words per document variant, under Settings, Documents, Wording and inclusions.
Kit lost after its outstanding job is invoiced
An outstanding kit job that has been invoiced keeps its figures, so a replacement charged later goes on a job of its own:
- Mark the line lost on the outstanding job as usual. The line wears its Lost pill there, and the invoice you sent stays exactly as it was
- The replacement goes on a new job with the next reference in the series (MPS-2026-0006-2 after -1), titled “Replacement for kit lost from” the outstanding job, for the same client. The timelines of the jobs involved say where the item was lost and where its replacement is charged
- More kit lost from the same outstanding job goes on that replacement job too, until the replacement job is invoiced
- The hire on the outstanding job stops at its invoice, so the days between that invoice and the loss are not charged. To charge them, quote them on a job of their own
- A case checked at the bench after its outstanding job is invoiced may be missing an item that was scanned back inside it before the invoice. That item goes out at no charge on an outstanding kit job from the same original job, one still open and not yet invoiced, or a new one, and the invoice stays as it was. It is on the missing items report, and is scanned back or marked lost like any other outstanding kit; marked lost, only its replacement is charged. An item already booked on another job, or in maintenance, stays where it is, and the check says where
An ordinary job that is invoiced or complete cannot take a new charge. Mark the kit lost on its outstanding kit job instead, or raise a credit note.
Still With the Client
For kit the client has kept on purpose, a longer hire you have agreed or a spare they are holding. The line stays out on the job, reading “With the client since” the day you said so, and holds until it is scanned back. It does not count as an overdue return on your dashboard.
The Missing Items Reports
While a job has kit that has not come back, its Documents menu offers two reports, for owners, admins and managers:
- Missing Items Report, for the client: each item, quantity, barcode, serial number, replacement value and status (Not returned, or Lost, charged), with the total replacement value of what has not come back. Preview Missing Items Report opens it; Send Missing Items Report… emails it, to the client’s address or one you type, with a message of your own
- Missing Sub-hire Report…, one for each supplier whose hired kit is still out, with their order numbers and no prices. Preview it or send it to the supplier from the list
The original job and its outstanding kit job report the same kit, so send it from whichever you have open. Every report sent is noted on the job’s timeline. On the Mac they are in the job’s Documents panel; on the iPhone, under Quote, where you can preview and send the client’s report and preview each supplier’s.
Good to Know
- A job with kit still out cannot be deleted. Scan the kit back, or finish check in, first
- A line with hired kit counted against it needs the count undone before it can be marked missing or lost
- Your dashboard’s overdue returns leave out kit still with the client and kit on an outstanding kit job, because somebody has already decided about those
- With Smart Scan, a returned permanent case can be opened and checked; anything not seen goes back to being out on the job it came home from, ready for Finish check in
Next Steps
- Availability & Clashes: How free figures are counted
- Smart Scan: Returns, Bring home and checking a case
- Sub-hiring from a Supplier: Hired kit and its orders