Hiring in from a company that is not on Rental HQ? This is the page for you. Whether you call it cross-hire, sub-hire or hiring in, from a hire company, a supplier or a friend down the road, if they do not use Rental HQ you raise them a purchase order from the job, and Rental HQ keeps track of the kit until the job is over. If the kit is coming from a company that is on Rental HQ and connected to you as a partner, use partner hire instead: you ask for their kit from the job and they answer in their own Rental HQ. Once you have a partner, Sub-hire on a short line asks which you want (see From a Partner).

Cross-hiring from a Supplier, Step by Step

Say a job needs sixteen tower lights and you own none. On the web:

  1. Open the job’s Equipment tab. The line is tinted red with its Avail figure in red, and a red strip above the list says which lines are short for these dates. Click the line: its pane says Short by 16
  2. If you like, click Swap in the pane first, to see whether a similar product you own is free on those dates
  3. Click Sub-hire in the pane (if you have a partner, choose From a supplier), or Sub-hire from a supplier in the red strip to order every short line at once, each from its own supplier. The Raise purchase order window opens with the line filled in
  4. Under Supplier, choose who you are hiring from. Each supplier shows its company, the person and their email, so you can tell two people at one company apart. Not in the list? Click + Add a new supplier and type the company, the contact person if there is one, and the email address they take orders on
  5. Check Qty and the unit cost, and leave Type on Hire in
  6. Under Deliver to, choose your warehouse, or The venue (offered when the job has one) if the supplier is taking it straight to site. Add an Expected date, Carriage and Notes to the supplier if you have them
  7. Click Raise PO, which shows the order’s total beside it. The line’s pane now reads On order in blue, with the order’s number
  8. Go to Inventory → Purchase Orders, click the order, and click Send to email it to the supplier. Or click PDF and send it yourself
  9. When the kit arrives, open the order again and click Book in. Check the quantities that arrived in good order and click Accept into stock. Hired-in kit is marked as on site; it never joins your own stock
  10. Back on the job, the line reads 16 hired in and is no longer short

The rest of this page takes each step in turn.

Add the Supplier

A purchase order goes to a contact marked as a Supplier. There are two ways to add one:

  • From Contacts. Open Contacts, choose the Suppliers tab and click Add Supplier, which ticks Supplier for you. (From the All tab, Add Contact works too: tick Supplier under Categories.) Add the email address they take orders on, so the order can be sent from Rental HQ
  • While raising the order. In the purchase order, click + Add a new supplier under the supplier list and type the company name, the Contact person if you know who you are ordering from, and their email. They are saved to your contacts as a supplier when the order is raised. If a contact of that name already exists, that contact is used and marked as a supplier, so you never end up with two of them. With a contact person, only that person at that company is reused: a new person at a company you already have is added as a new contact, rather than the order going to somebody else there

Suppliers who are not VAT registered

If a supplier does not charge VAT, open them in Contacts, click Edit and tick Not VAT registered. Their purchase orders then show the net amount as the total, with no VAT line. Tick it on the company and everyone at that company follows it; their contacts say Not VAT registered (company). Orders already sent keep the VAT they were sent with, and drafts follow the change. To change it for one order only, click Edit on the order and set VAT to Charged or Not charged.

Which contact gets the order

The order is emailed to the contact you choose, so the supplier list says who each one is: the company first, then the person, then their email, such as Illuminate Design Ltd · Ed Yetton, ed@…. A contact that is the company itself, such as an info@ address, shows its email instead: Illuminate Design Ltd · info@…. A supplier with no company shows just its name. When a company has several contacts they are listed together under the company, its own contact first and then its people in alphabetical order. The search box finds a company, a person or an email address.

The order is addressed to the company and, when you chose a person, their name goes on it as FAO and the email greets them by name.

Next time you are short of the same product, Rental HQ suggests its preferred supplier, or failing that the supplier you ordered it from last, with the unit cost you paid. When every line in the order suggests the same supplier, it is chosen for you and the window says Suggested from what you ordered last time.

The Short Line

On the job’s Equipment tab, a line you cannot fully supply shows:

  • A red row. Click it and the line’s pane says Short by 16, with Swap and Sub-hire. Accessories are short in the same way: a stand that came with a screen is stock of its own, so it can be short when the screen is not. Its row turns red, and its menu has Swap product… and Sub-hire from a supplier…
  • The Avail figure: how many are free for that line on its worst day, after every other confirmed job, what is lent to partners and what is in maintenance
  • A red strip above the list saying how many lines are short for these dates, with a Sub-hire from a supplier button
  • A tag on a folded group saying how many units in it are short, such as 16 short, so a short line inside a group is not out of sight

This includes products you do not own at all. Sixteen tower lights with none in stock are sixteen short, whatever stage the job is at. A quote shows its shortages too, so you can arrange the kit before the client says yes, even though a quote does not hold stock by default (see What Reserves Stock).

Before you sub-hire, try Swap: it offers similar products you own that are free on the dates, which costs nothing.

Raise the Order

Open the purchase order from whichever of these is nearest:

  • Sub-hire in a short line’s pane, for that line
  • Sub-hire from a supplier… in the line’s menu: the three dots at the end of its row, or right-click the row. It works on any line, short or not, accessories included, for when your own kit is somewhere else that day
  • Sub-hire from a supplier in the red strip above the equipment list, for every line that is short, each from its own supplier (see Sub-hire All)
  • The job’s POs tab, under Logistics, where Short on this job lists every short line with its own Sub-hire button
  • Sub-hire from a supplier… in the equipment toolbar’s More menu: every short line at once, or, when nothing on the job is short, an order that opens with one blank line ready for you to type what you need
  • When you add more than you have, the Insufficient Stock window offers Add all 16 and sub-hire 16 from a supplier: one line for everything, and the order for the rest

The order arrives filled in from the line:

  1. Supplier. Choose one, or add a new one
  2. Add to an open order, or start a new one. If the job already has an order open with that supplier (a draft, or one that is sent or acknowledged), the window says This job already has an order open with this supplier: and offers Add to PO-2026-0002 with Start a new order beside it. A draft is chosen for you. An order you have already sent is offered but not chosen, because adding to it changes what the supplier has, so that is yours to pick. With several open orders to that supplier, each is offered by its number, with its status and how many lines it has. An order in another currency is shown but cannot be chosen, since the costs here are in your own currency. Added to an order, the lines keep their quantity, cost and part number as above, and the order keeps its own delivery, date, carriage and notes, so those fields fold away. The button reads Add to PO-2026-0002, and so does the window’s title
  3. Lines. Each short line, with the quantity you are short of. Change the quantity and unit cost if you need to. Type is Hire in: leave it that way. Buy is for kit you are keeping, and adds it to your stock for good when it is booked in
  4. Deliver to. Your warehouse, or The venue (offered when the job has one) if the supplier is taking it straight to site. The venue’s address goes on the order
  5. Expected date, Carriage and Notes to the supplier, if you have them
  6. Click Raise PO, which shows the order’s total beside it

You do not type the hire dates. A short line asks for the kit from the job’s setup days to its de-rig days; a line that is not short, ordered from the line’s menu, uses its own hire dates; and a line you add by hand in the order uses the job’s dates. The dates are printed on the order’s Hire in lines.

Adding to an order works as editing it does. A draft simply gains the line. An order you have already sent, or that the supplier has acknowledged, gets a change: a new revision in its history, which the supplier sees when you send the order again. Nothing is emailed until you do, and the confirmation says Send the order again when you want the supplier to see the change. Until then the order says Changed, not sent in the purchase order list and on the job’s POs tab. Received and cancelled orders, and orders that follow a partner hire request, are not offered.

The line’s pane now reads On order in blue with the order’s number, and the red strip no longer counts it. It stays tinted until the kit is booked in. If you ordered fewer than it is short of, the rest is still short: Short by 4 · 12 on order.

If the supplier you choose is also the one suggested for a short line on another live job, the order says {Supplier} could also cover N items short on other jobs and offers to add them, so one delivery and one carriage charge covers both. A supplier you are adding for the first time gets no such offer, and neither do lines split between several suppliers (see below).

Sub-hire All: a Supplier for Each Line

When more than one line is short, Sub-hire from a supplier in the red strip, or Sub-hire all in Short on this job on the POs tab, opens every short line at once, and each line has its own Supplier. Hire the screen from one company and its stand from another, in one go:

  1. Each line starts at its suggested supplier: its preferred supplier, or the one you ordered it from last. A line with no suggestion says Choose a supplier…
  2. A line whose product has more than one supplier on its Suppliers tab lists them first, under Supplies this item, each with its cost and lead time, preferred first and then the cheapest. Choosing one sets the line’s unit cost to that supplier’s, and the line says how long the chosen supplier takes
  3. Change any line’s supplier from its own list. To send them all to one supplier, use Set every line to above the lines
  4. For a supplier you have not used before, choose + Add a new supplier… in a line’s list and type the company, contact person and email underneath. Once added, it is offered to every line
  5. No supplier for a line yet? Click Not now at the end of its row. The line is greyed and says Stays short for now, and nothing is ordered for it. Bring back puts it back. A short line you leave on Choose a supplier… stays short in the same way, so you can order what you can now and the rest later. A line you typed in yourself needs a supplier, or remove it
  6. Below the lines, each supplier’s order is listed with its own Carriage and total. If the job already has an order open with that supplier, its row has a picker offering Add to PO-2026-0002 (with the order’s status and how many lines it has) or New order. A draft is chosen for you; an order already sent is yours to choose. An order you add to keeps its own carriage, and the row says what adding means for it. Deliver to, Expected date and Notes to the supplier are filled in once and go on every new order. When every line goes on an open order, those fields fold away and the window says the order keeps its own delivery, date and notes
  7. The foot of the window says what will happen, such as 3 lines on 2 orders · 1 stays short for now
  8. Click the button, which says what it will do and shows the total beside it: Raise 2 purchase orders, Add to PO-2026-0002, Raise 1 order and add to PO-2026-0002, or Raise 2 orders and add to 2. One order is raised per supplier, numbered one after another, and the job’s POs tab lists them all

The lines left out stay short on the job, with their own Sub-hire for when you have a supplier. The orders are raised and added to together or not at all: if one cannot be placed, none are, and nothing needs tidying up. While every line goes to the same supplier, the offer to add lines short on other jobs appears as it does for a single order.

Sub-hire on one line keeps the simpler window, with one supplier for the order, unless the line’s product has more than one supplier listed: then it opens this window, so you can choose between them.

From a Partner

If another company you hire from also uses Rental HQ, connecting to them as a partner is better than a purchase order: you see their live stock for your dates, and the booking appears on both sides. Once you have an active partner under Contacts → Partners, Sub-hire in a short line’s pane offers two choices, and the line’s menu has both, as Sub-hire from a partner… and Sub-hire from a supplier…:

  • From a partner lists every partner with the product free on the line’s dates, with their price, and asks for the number the line is still short of, split across partners if one has too few. The request sits under the line until they answer, and the line stops reading short. The whole of it is in Partner Hire
  • From a supplier raises a purchase order, as on the rest of this page

Without a partner, Sub-hire goes straight to the purchase order, which mentions once that you can partner with companies that use Rental HQ. Click the cross to hide that note for good. Rental HQ never tells you whether a supplier uses Rental HQ: which companies do is theirs to share.

Raise it from the job. Raise PO on the Purchase Orders page makes an order that belongs to no job line, so the line it was meant for keeps showing short. Use it for stock you are buying, and start a sub-hire from the job.

A Reference and a Delivery Telephone

An order can carry a Reference of its own, such as the supplier’s quotation number, and a Delivery telephone for whoever takes the delivery. Open the order from Inventory → Purchase Orders, click Edit, fill them in and save. Until you give one, the Reference field shows the job’s reference as a hint. Each shows among the order’s details once it is set, and prints on a purchase order design that has a place for it.

Send It

Go to Inventory → Purchase Orders and click the order to open it. Send emails it to the supplier as a PDF and marks it Sent; it needs an email address on the supplier. PDF downloads it instead, if you would rather send it yourself. Either way it is noted in the order’s history.

Book It In

When the kit arrives, book it in in one of two ways:

  • Inventory → Purchase Orders → open the order → Book in. Add the Delivery note reference if you have one, put each line’s quantity under Good, and any damaged ones under Rejected, then click Accept into stock. Despite the button’s name, hired-in kit is marked as on site, not added to your stock; only Buy lines go into stock. You can book in part of an order and the rest later
  • On the job’s POs tab, open the order and click Received. Everything still to arrive on its hire-in lines is booked in at once, in full. Received is offered once the order is Sent or Acknowledged. If you sent it yourself, click Mark as Sent first: it changes the status only, and emails nobody

Received books in hired-in kit only. Bought items on the same order wait for Book in, so they reach your stock: the order stays open as Acknowledged and says Hired-in kit booked in. Book in the bought items from Purchase Orders when they arrive. An order of only bought items sends you to Book in instead. Use Book in too for a part delivery or anything damaged. An order is Draft, Sent, Acknowledged, Received or Cancelled; there is no separate closed status.

The line on the job then shows 16 hired in and is no longer short. Hired-in kit is never added to your stock: it counts for that job’s days, from its setup days to its de-rig days and any buffer days your company adds after a job, and, if you narrowed the dates on the order, no further than those, widened by the same setup, de-rig and buffer days.

On a job that hires kit in, the equipment list filters by Our kit, Hired in or All, and Documents offers an Our kit pick list and a hired-in list, one for each supplier when there are several.

What the Availability Grid Shows

Go to Opportunities → Availability, choose the dates, click Check availability, then switch to Grid. It shows each product day by day. A day when more is wanted than you have is a solid red cell with how many you are short: −16. That shows while the job is at a stage that holds stock: confirmed, in prep or dispatched, or a quote too, if quotes hold stock in your settings or you tick Count quotes as taken. Hired-in kit itself counts on the grid once the job is confirmed, in prep or dispatched, or on a quote, if quotes hold stock in your settings. A product you own none of is grey only on the days nothing wants it.

  • Before the kit is booked in, the job’s days show −16
  • Once it is booked in, those days show 0: all sixteen are there, and all sixteen are spoken for. Hover a cell and it says 16 hired in
  • Every other day is as it was. The hired-in kit has gone back by then

Kit hired in for a job covers that job first. If another job wants two more on the same day, that job is still two short, and the grid shows −2. If you ordered more than the line needs, the spare can cover another of your jobs on those days. It is never offered on your Showroom storefront or to partners: it is the supplier’s kit, not yours to hire out. The list view does the same sums: a product overbooked across the dates you asked about shows how far below zero it goes.

Confirmed Jobs, Confirmed Lines

When a job is confirmed, however it happens (the status menu, the client approving the quote, a deposit being paid, or the Mac or phone app), its lines move from Provisional to Confirmed. A line added to a confirmed job arrives confirmed. If the job goes back to an enquiry or a quote, or is cancelled, its confirmed lines go back to provisional. Lines that have been picked, prepped, dispatched or returned keep the status scanning gave them.

Lines on jobs confirmed before 1.6.0 that still read Provisional were confirmed once, when 1.6.0 arrived.

Counting Hired-in Kit (Smart Scan)

With Smart Scan, which is how every company scans unless it has chosen One step at a time, hired-in kit is counted rather than scanned, because its barcodes are the supplier’s, not yours. On the scan station the line says Hired in, with a Count 16 in button. Count it at the bench, count it again onto the van, and count it once more when it comes home: each count moves it on, as a scan would. On the iPhone, Count in on the scanner opens the Hired in list, with the same button on each line.

Kit that is on order and not booked in yet can still be counted. The station says it is on order and not booked in, so the office knows to book it in.

On the Mac and iPhone

  • Mac. The Short on this job card above the equipment list has Sub-hire… on each line and Sub-hire All…, which gives each line its own supplier and raises one order per supplier, as on the web. Not Now at the end of a line leaves it short for now, and Bring Back returns it. When the job already has an order open with the chosen supplier, both windows offer Add to that order or a new one, as on the web. Right-click a line or an accessory for Sub-hire from a Supplier…, or use the Sub-hire menu above the list, which offers From a Supplier… and From a Partner…. With a partner, the right-click menu and the card offer both as well, and From a Partner… opens Request Sub-Hire searched for that product. Select a short line and its pane reads 16 short, 4 short · 12 on order or On order, with Sub-hire from a Supplier… and Swap Product… under it. The order can add a new supplier and choose where it is delivered, and the supplier list shows each company, person and email, as on the web. The availability grid shows overbooked days in red with how many you are short
  • iPhone and iPad. The job’s equipment list shows what is short in red, accessories included, On order once an order covers it, Short by 4 · 12 on order when it covers part, and 16 hired in once the kit is booked in. Raise the order on the web or the Mac. To book the kit in on the iPhone, open Deliveries (a tab for the warehouse role; managers reach it from the Deliveries row on Today), tap the delivery to open Book in, set Arrived and Rejected for each line, and tap Accept

Sending It Back

Rental HQ does not yet record the kit going back to the supplier. You do not need to: hired-in kit stops counting after the job’s de-rig and buffer days. Scanning the job back early brings that forward: the buffer days then run from the day the kit came back.

Kit that has not come back when the rest of the job has, hired in or your own, stays out on the job until it does. Finish check in settles every line still out as Missing, Lost or Still with the client; see Overdue & Missing Kit. To tell a supplier what has not come back, choose Missing Sub-hire Report… from the job’s Documents menu: there is one report for each supplier, to preview or send, with no prices on it.

Troubleshooting

The line is still short after the kit was booked in

  • Check the order was raised from the job. An order raised from the Purchase Orders page is not tied to the line
  • Check the quantity booked in. A part delivery covers what arrived, and the line stays short for the rest
  • Check the line’s type was Hire in. A Buy line adds to your stock instead, for good
  • A cancelled order, or a line refused at goods in, covers nothing

The supplier is not in the list

  • The list shows contacts marked as a supplier. In Contacts, click the pencil on their row (Edit contact) and tick Supplier, or type their name under + Add a new supplier and Rental HQ uses the contact you already have

Sub-hire is not offered

  • Raising a purchase order is for people who can see prices. Ask an owner, admin or manager
  • A completed or invoiced job is locked, so no new orders are raised from it. Un-complete it first

The supplier is on Rental HQ too

  • If they are connected to you as a partner under Contacts → Partners, Sub-hire offers From a partner, and their free stock shows in Add Equipment. See From a Partner and Resolving Clashes

Several contacts at one company look alike

  • Each shows its person and email after the company. If two still read the same, open them in Contacts and give each its person’s name and email. The order goes to the email of the one you choose

The Raise button is greyed out

  • Every line stays short: each is left out with Not now or has no supplier chosen. The foot of the window says Every line stays short. Bring a line back, or choose a supplier for one, to order it.
  • A new supplier you added has no company name yet

Add to an order is not offered

  • Only orders for this job, to the supplier you chose, that are still open are offered: a draft, or sent or acknowledged. A received or cancelled order, or one that follows a partner hire request, takes no new lines. Choose Start a new order instead
  • If the order changed while the window was open (someone received it, or moved it to another supplier), Rental HQ says so and shows the orders open now. Choose again

Next Steps

Was this helpful?
Up next
Spec IQ
Upload a tech rider PDF, Word doc, or photo. AI extracts the requirements, matches them to your inventory, and adds them to the job.